Elu MOF96 - EC Declaration of Conformity; Technical Data; Fuses; Symbols Used in Manual

ENGLISH
14 en - 1
Congratulations!
You have chosen an Elu Power Tool. Years of
experience, thorough product development and
innovation make Elu one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 4
Assembly and adjustment en - 4
Instructions for use en - 5
Maintenance en - 6
Guarantee en -6
Technical data
MOF96 MOF96E
Voltage V 230 230
(U.K. & Ireland only) V 230/115 230/115
Power input W 750 900
No load speed min
-1
24,000 8,000-24,000
Router carriage 2 columns 2 columns
Plunge mm 35 35
Revolver depth stop 3-step, 3-step,
with with
graduation graduation
Collet size inch 1/4 1/4
Cutters diameter, max. mm 30 30
Weight kg 2.8 2.9
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
ROUTER MOF96/MOF96E
Denotes risk of electric shock.
EC-Declaration of conformity
MOF96/MOF96E
Elu declares that these Power Tools have been
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 50144,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact Elu at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144:
MOF96 MOF96E
L
pA
(sound pressure) dB(A)* 88 88
L
WA
(acoustic power) dB(A) 89 89
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
MOF96 MOF96E
5.9 m/s
2
5.9 m/s
2
Director Engineering and Product Development
Horst Großmann
Elu International, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte