Need help?Do you have a question about the Elu TGS173 and is the answer not in the manual?
States compliance with relevant European directives for the TGS173 saw.
Lists detailed technical data including voltage, power, and dimensions.
Explains the meaning of symbols used in the manual for safety warnings.
Essential safety rules covering work area, personal protection, and tool handling.
Safety precautions tailored for flip-over and mitre saw operations.
Overview of the Elu flip-over saw and its mitre and saw bench operational modes.
Details included items and inherent risks associated with the tool's use.
Guidelines for mains plug replacement and extension cable usage.
Instructions for assembling the machine, including fitting legs and initial adjustments.
Steps for attaching the under-table guard and mounting the saw blade.
Guides on adjusting depth, mitre angle, bevel, and blade alignment.
Steps for reconfiguring the machine from mitre saw to saw bench configuration.
Adjusting the riving knife and fitting the upper blade guard for saw bench mode.
Guidance on mounting, adjusting, and using the parallel fence.
Techniques for performing straight, mitre, bevel, and compound cuts.
Instructions for ripping, bevel, and mitre cuts using the saw bench mode.
Advice on correctly positioning the fence for various ripping tasks.
Descriptions of various optional accessories for the saw.
Guidelines for safe transport, routine maintenance, and lubrication.
Information on tool disposal and warranty coverage.
To Next Page
General