Elu WS50 - Page 19

19
ENGLISH
ANGLE GRINDER WS50/WS51E/WS52E/WS53/
WS53E/WS54E/WS55E/WS56E/WS61/DT53EK
Congratulations!
You have chosen an Elu Power Tool. Years of experience, thorough product development and innovation
make Elu one of the most reliable partners for professional Power Tool users.
Technical data
WS50 WS51E WS52E WS53 WS53E WS54E WS55E WS56E WS61 DT53EK
Voltage V 230 230 230 230 230 230 230 230 230 230
(U.K. & Ireland only) V 230/115 230/115 230/115 230/115 230/115 230/115 230/115 230/115 230/115 230/115
Power input W 1,800 2,000 2,400 2,000 2,000 2,400 2,200 2,200 2,200 2,000
No load speed min
-1
6,900 8,000 8,000 6,300 6,300 6,300 8,000 6,300 6,300 4,700
Wheel diameter mm 230 180 180 230 230 230 180 230 230 230
Spindle M14 M14 M14 M14 M14 M14 M14 M14 M14 M14
Weight kg 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
WS51E/WS52E/WS53E/WS54E/WS55E/WS56E/
DT53E
Elu declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
WS50/WS53/WS61
Elu declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014, EN 61000-3-2 & EN 61000-3-11.
For more information, please contact Elu at the
address below, or refer to the back of the manual.
WS51E.PM65 17-09-2001, 10:2619