Elumen8 MP75 - Page 9

www.prolight.co.uk MP75 LED Fresnel RGBW User Manual
9
Operating instructions
Dimming curves
To access the units dimmer curves, press the “MENU” button on the rear of the unit to show
“DimCurve” on the LCD display. Press the “ENTER” button and use the “UP” and “DOWN” buttons
to set the dimming curve required.
“Linear” - LELinear dimming curve
“Square” - LED Square dimming curve
“INV.Squa” - LED Inverse Square dimming curve
“S-Curve” - LED S-Curve dimming curve
Press the “ENTER” button to conrm the setting.
To choose between Halogen and LED dimmer curves, press the “MENU” button on the rear of the unit to
show “LampCurv” on the LCD display. Press the “ENTER” button and use the “UP” and “DOWN” buttons
to set the dimming curve mode required.
“LED” - LED dimming curves
“Halogen” - Halogen dimming curves
To exit out of any of the above options, press the “MENU” button.