elvita CDM6602V User Manual

Getting started - ENGLISH 15
Find the model code
The model code is printed on a label on the product. You need the code to find the complete and most recent information,
service and support for your product model.
NOTE!
This product and label text are examples. Your product and text may have a different look and content.
Before first use
CAUTION!
Before washing, make sure the dishwasher is correctly installed.
You need to add salt to the water softener to remove minerals and salts from the water that would have an adverse effect
on the operation of the dishwasher. See section "Add salt to the water softener", page 22.
Adjust the water softener level
Set the water softener level according to the hardness of the water in your area. See the following table to select the
appropriate level. Your local water authority can advise you on the local water hardness.
Water hardness Water softener
level
Regeneration
occurrence*
Salt
consumption
(grams/cycle)
German °dH French °fH British °Clarke mmol/l
0 - 5 0 - 9 0 - 6 0 - 0.94 H1 is displayed No
regeneration
0
6 - 11 10 - 20 7 - 14 1.0 - 2.0 H2 is displayed 10 9
12 - 17 21 - 30 15 - 21 2.1 - 3.0 H3 is displayed 5 12
18 - 22 31 - 40 22 - 28 3.1 - 4.0 H4 is displayed 3 20
23 - 34 41 - 60 29 - 42 4.1 - 6.0 H5 is displayed 2 30
35 - 55 61 - 98 43 - 69 6.1 - 9.8 H6 is displayed 1 60
*Regeneration occurs every X programme sequence.
NOTE!
Every cycle with a regeneration operation increases the water consumption by 2.0litres of water, the energy
consumption by 0.02kWh, and the programme duration by 4minutes.

elvita CDM6602V Specifications

General

Type	Freestanding
Number of programs	6
Noise level	49 dB
Place Settings	12
Delay Start	Yes