EM TEST UCS 500Mx - Delivery Groups and Options; Basic Equipment Included; Available Accessories and Options

EM TEST UCS 500 Series
Operating Manual V 3.05 20 / 57
8. Delivery Groups
8.1. Basic equipment
• Generator type UCS 500M4/M6/M6A with recommended modules ( Burst, Surge, Power Fail, ESD)
• Mains cable
• Mains cable for the EUT supply
• Adapter for power cable
• Manual
• Calibration certificate
8.2. Accessories and options
Burst
- Capacitive coupling clamp as per IEC 61000-4-4 to couple the fast transients to signal and data lines
- ITP immunity test set for radiation
- 50 Ω matching resistor with integrated attenuator (1:100) type KW 50
- 1000 Ω matching resistor with integrated attenuator(1:1000) type KW 1000
- Attenuator 6 dB / 50 Ω
Surge
- Coupling/decoupling network as per IEC 61000-4-5 for signal lines type CNV 504/508 (4 wires and 8 wires)
- 3 phase CNV 503 up to 100A
Power Fail
- Transformer type V4780
- Variac MV 2616
Magnetic field
- Magnetic field antenna MS 100
- Current transformer MC 2630 up to 30A/m
- Current transformer MC 26100 up to 1000A/m
ESD
- Vertical coupling plate type VCP
- Grounding set type EAS 30
- Test table PRT
General for Burst and Surge
- External coupling/decoupling network 3 - phase CNI 503
- EUT mains supply 400 V rms max. // 480V for USA
- Nominal current In = 16 A / 32A / 63A / 100 A rms
- Frequency 50/60 Hz
- Coupling to all lines, N, PE
- 50Ω Burst output The coupling will be controlled by the UCS 500 or EFT 500
- Output for Surge coupling to other coupling networks as CNV types ...
Software "ISM_IEC"
- Test and documentation under Windows (see separate documentation)