EM TEST UCS 500 Series
Operating Manual V 3.05 55 / 57
13. Appendix
13.1. Declaration of CE-Conformity
Manufacturer :
EM TEST AG
Address: Sternenhofstr. 15CH 4153 Reinach
Switzerland
declares, that under is sole responsibility, the product’s listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product‘s name: Ultra compact generator
Model Number(s) UCS 500, UCS 500 M4, UCS 500 M6, UCS 500 M6A
Low Voltage Directive 73/23/EEC
Standard to which conformity is declared:
EN 61010-1 Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 89/336/EEC
Standard(s) to which conformity is declared:
EN 61326 Electrical equipment for measurement, control and laboratory use Class A
EN 61000-3-2 Limits for harmonic current emissions
EN 61000-3-3 Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
European representative Manufacturer
EM TEST GmbH EM TEST AG
Lünenerstr. 211 Sternenhofstr. 15
D 59174 Kamen CH 4153 Reinach
Tel: 00492307-18042 Tel: 004161-7179191
Fax: 00492307-17050 Fax: 004161-7179199
By U. Flor
General manager
H. Kunkel
Design and Research
Place Kamen, Germany Reinach BL , Switzerland
Date 11. November 2002 11. November 2002
To Next Page
Loading...