03
4.1 How to ride
4. How to ride
1. Turn on the E-Scooter by pressing the power button for 2 seconds
and check the battery power level. .
Power key
3. Turn o the scooter by holding the power button when you
are done riding.
2. In order to let the electronic motor accelerate, push yourself of the ground a few times to
reach the minimum speed and hold down the accelerator paddle to accelerate. You can
control your speed by easing up on the accelerator. If you come to a complete halt you
have to push yourself o again.
Power key
Warning: Accidents could occur during practice. Make sure to wear an appropriate helmet and protectors during
riding. E-Scooter is not suitable for people under 14 Years!
The quoted regulations pertain to gerrman law. Please inquire about your countries/states legislations.
Warning: If the scooter has an electric brake and a rear physical break, the
electric brake is to be used first and the rear break only as auxiliary brake, in
case of the electric brake not working properly or is not sufficient.
Do not use the rear brake excessively, as it could damage the tire or fender.
To Next Page
Loading...