EMAK Oleo-Mac BCi 30 User Manual

GB
23
12. WARRANTY CERTIFICATE
This machine has been designed and manufactured using
the most modern techniques. The company guarantees its
products for 24 months from the date of purchase, for home
and non-professional use. Warranty is limited to 12 months in
the case of professional us
General conditions of warranty
1. The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any parts
proven defective in material, machining or manufacturing.
The warranty does not aect the purchaser's rights as
established under legislation governing the consequences
of defects in the machine.
2. Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible with
organizational needs.
3. To make any claim under the warranty, this certicate
of warranty, fully completed, bearing the dealer’s
stamp and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the authorized personnel.
MODEL
PURCHASED BY MR/MS
SERIAL No
DATE
DEALER
4. The warranty becomes null and void if:
• There is an obvious lack of maintenance, - The product
has been misused or has been modied in any way,
• Unsuitable lubricants and fuels have been used,
• Non-original spare parts or accessories have been
used,
• Work has been done on the product by unauthorized
persons.
5. The warranty does not cover consumables or parts subject
to normal wear.
6. The warranty does not cover work to update or improve
the machine.
7. The warranty does not cover any preparation or
maintenance work required during the warranty period.
8. Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render the warranty null and void.
9. The warranty does not cover injury or damage caused
directly or indirectly to persons or things by defects in the
machine or resulting from the forced extended disuse of
the machine.
The undersigned, EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
declares, under its own responsibility, that the machine:
1. Category: electric lawn trimmer
2. Brand: / Type:
Oleo-Mac BCi 30 – Efco DSi 30
3. Serial number identication 647 XXX 0001 - 647 XXX 9999
conforms to the requirements of Directives
2006/42/EC – 2014/30/EU – 2011/65/EC – 2014/35/EU –
2000/14/EC allegato I n° 33
conforms to the provisions of the following
harmonized standards
EN 60335-1:2013 – EN 60636-2-91:2015 – EN 55012:2007 / A1:2009
Conformity assessment procedures followed 2000/14/EC Annex VI procedura 1
Measured sound power level 86.2 dB (A)
Guaranteed sound power level 87 dB (A)
Notifying body 2000/14/EC
ICE Istituto Certicazione Europea S.p.A. v. Garibaldi, 20 – 40011
Anzola Emilia (BO) – Italy n° 0303
Type of cutting device nylon line
Cutting width 30 cm
Made in Bagnolo in piano (RE) Italy - via Fermi, 4
Date 01/09/2018
Technical documentation led in Administrative Oce – Technical Department
Fausto Bellamico - President
s.p.a.
11. DECLARATION OF CONFORMITY
Do not send! Only attach to requests for technical warranties.

EMAK Oleo-Mac BCi 30 Specifications

General

Brand	EMAK
Model	Oleo-Mac BCi 30
Category	Trimmer
Language	English