11
7) To check the available charge, press the Battery Fuel Gauge
button (E).
8) As soon as the green light (F) lights up to indicate that the
battery is fully charged, you can remove the charger.
9) When not in use, disconnect the battery charger from the
battery.
WARNING! If the rechargeable battery pack fails to
charge, check whether there is voltage at the socket
outlet. If you are still unable to charge the battery, contact
an authorised service centre. Timely recharging of the
battery will help it to serve you well for a long time.
STORING THE BATTERY CHARGER
Store the battery charger out of children’s reach in a dark and dry
place at above-zero temperatures. Store the battery charger only in
dry places with an ambient temperature of 10-40°C. Store and
transport the battery charger in its original packaging.
TECHNICAL DATA
Mains input voltage 100V - 240V 50/60 Hz
Available output voltage/current 12,6V
2.0
BATTERY CHARGER WARRANTY CERTIFICATE
This machine has been designed and manufactured using the most
modern techniques. The company guarantees its products for 24
months from the date of purchase, for home and leisure use. The
warranty is limited to 12 months in the case of professional use.
Limited warranty
1) The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical assistance
network, will replace free of charge any parts proven defective in
material, machining or manufacturing. The warranty does not
affect the purchaser’s rights as established under legislation
governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary repairs in the
minimum time possible, compatible with organisational needs.
3) To make a claim under warranty, proof of purchase in the
form of an invoice or till receipt must be shown to the
authorised company representative.
4) The warranty becomes null and void if:
• The product has evidently not been serviced correctly
• The machine has been used for improper purposes or has
been modified in any way
• Unsuitable lubricants and fuels have been used
• Non-original spare parts or accessories have been fitted
• Work has been done on the product by unauthorised
persons
5) The warranty does not cover consumables or parts subject to
normal wear.
6) The warranty does not cover work to update or improve the
machine.
7) The warranty does not cover any preparation or maintenance
work required during the warranty period.
8) Damage incurred during transport must be immediately brought
to the attention of the carrier: failure to do so shall render the
warranty null and void.
9) The warranty does not cover injury or damage caused directly or
indirectly to persons or property by periods of extended disuse of
the machine resulting from the said defects.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The battery charger fails to charge the
battery (no light on)
No power supply to the battery charger Check the plug is inserted and that the
socket outlet is receiving power
The battery charger fails to charge the
battery (no light on)
Defective battery charger or cable Replace the battery charger
DECLARATION OF CONFORMITY
The undersigned, EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
declares under its own responsibility that the machine:
1. Type: BATTERY CHARGER
2. Trademark: / Type: XSG1262000EU - CH1262000EU
complies with the requirements
established by directive
2014/35/EU - 2014/30/EU - 2011/65/EU
conforms with the provisions of the
following harmonised standards:
EN 60335-1:2012/A11:2014 - EN 60335-2-29:2004/A11:2018 - EN 61000-3-2:2014
- EN 61000-3-3:2013 - EN 55014-1:2017 - EN 55014-2:2015
Imported by: Bagnolo in piano (RE) Italy - via Fermi, 4
Date: 01/08/2020
Technical documentation led in: the administrative authorities. - Technical Department
Fausto Bellamico - President
s.p.a.
To Next Page
Loading...