After completing the transfer, please follow the “Safely
Remove Hardware” Instructions to disconnect the
player.
After completing the transfer, you can unplug the
player from the computer directly.
Getting Started
1. Make sure your battery is enough and connect the earphone correctly.
2. Press and hold the [ ] button to turn on the player. The DISPLAY lights up. The MP3
player enters Main menu with Music option selected by default.
3. Press the [M] button to enter the Music mode. By default the player will be in STOP mode.
4. Press the [M] button to start playing the music.
For more details on the player’s function, please refer to the chapter “Basic Operation” below or
the full use’s manual.
For any technical problems or inquiries, please email us or visit our FAQ section on our
website. You should receive a response within 24 hours: CustomerService@ematic.us or
Ematic.US and go to our FAQ section.
To Next Page
Loading...