Ematic EM102VID - Initial Device Operation; Getting Started Steps

6
Note:
 Please do not disconnect the USB cable during loading or synchronizing. It may cause
malfunction of the player and the files.
 DRM10-protected WMA files must be synchronized with your player using the Windows
Media Player 10 or above. Other wise, the files will not play.
 For details about usage of Windows Media Player, refer to the Windows Media Player Help.
Disconnecting the USB cable
MSC mode
MTP mode
After completing the transfer, please follow the “Safely
Remove Hardware” Instructions to disconnect the
player.
After completing the transfer, you can unplug the
player from the computer directly.
Getting Started
1. Make sure your battery is enough and connect the earphone correctly.
2. Press and hold the [ ] button to turn on the player. The DISPLAY lights up. The MP3 player enters
Main menu with Music option selected by default.
3. Press the [ ] button to enter the Music mode. By default the player will be in STOP mode.