Why is there a high pressure drop in my Emax Dehumidifier?
A high-pressure drop in your Emax Dehumidifier could be due to excessive compressed air flow or low air inlet pressure, so check the actual pressure and flow through the dryer. Another cause could be freeze up, so check the compressor room ambient. Alternatively, the fan switch might have failed in the closed position, keeping the fan running.
Why does my Emax Dehumidifier keep cycling off and on?
If your Emax Dehumidifier cycles off and on, it could be due to excessive ambient temperature, ensure the dryer is working below design conditions. Clogged condenser fins can also cause this, so clear them of any obstructions. A shortage of refrigerant may also be the reason; fix any leaks and add a charge of refrigerant.
What to do if an error sign occurs on the digital temperature control device of my Emax Dehumidifier?
If an error sign appears on the digital temperature control device of your Emax Dehumidifier, the dew point might be too low or too high. Check the refrigerant gas and ensure that the working conditions are within the correct range.
General| Model | PDRCF1150029 |
|---|---|
| Category | Dehumidifier |
| Dehumidification Capacity | 15 liters/day |
| Power Consumption | 220W |
| Weight | 10.5 kg |
| Operating Temperature | 5°C - 35°C |
To Next Page
