Need help?Do you have a question about the EMB Downdraft and is the answer not in the manual?
Lists the items included with the extractor fan for standard operation.
Details specific accessories required for the extraction mode installation.
Lists optional accessories available for enhancing functionality.
Explains how the display shows power levels, intensity, and run-on status.
Describes the functions of buttons for fan control, levels, and hood movement.
Provides instructions on cleaning the fan housing and filters.
Details the filter cleaning display and reset procedure.
Highlights safety precautions and general installation requirements.
Covers specific considerations for installing the unit in extraction mode.
Details requirements for installing the unit in recirculation mode.
Instructions for assembling foot extensions for taller work surfaces.
Guidance on assembling and positioning the control panel.
Steps for placing the device into the work surface cut-out and aligning it.
Details electrical connection for extraction mode devices.
Details electrical connection for recirculation mode devices.
Guides on the first operation and checking functions after installation.
Instructions on securing the device using mounting brackets after alignment.
Explains how to adjust the height and tilt of the extractor hood.
Procedure for performing an initialisation run if the hood movement is irregular.
Important safety advice before performing maintenance or repairs.
Advice on protecting the device during ongoing building site work.
General| Brand | EMB |
|---|---|
| Model | Downdraft |
| Category | Ventilation Hood |
| Language | English |
To Next Page