Embedded Systems LM5p-GSMC Datasheet

Embedded Systems SIA © 2021
www.logicmachine.net
LM5p2-RD, LM5p2-RDE
Data sheet / Issue date 26.11.2021
Page 16 / 16
Quick startup guide
1) Mounting the device on DIN rail
2) Connect the KNX bus cable
3) Connect 24V power supply to the device (either through separate 24V crew terminals or
through Passive 24V DC Power-Over-Ethernet)
4) Connect Ethernet/LAN cable coming from the PC/switch
Default IP configuration
Login name
admin
Password
admin
IP address
192.168.0.10
Network mask
255.255.255.0
Reset device
You can either reboot the device by pressing RESET button or reset the configuration to factory
defaults:
• Press and hold for <10 sec – reboot the device
• Press and hold for >10 sec – reset networking with IP to factory default
• Press and hold for >10 sec and again press and hold for >10 sec – full reset of configuration
to factory defaults

Embedded Systems LM5p-GSMC Specifications

General

Brand	Embedded Systems
Model	LM5p-GSMC
Category	Dimmer
Language	English