2
Please read this Instruction Booklet before installing
your Embertec Emberplug™ AV.
Your Embertec Emberplug™ can simply be plugged into the wall outlet, or it
can be plugged in and attached with a screw.
Step by step Instructions on how to install the unit with the screw
The Embertec Emberplug does not require fastening to the wall with the
supplied screw, but for the best secure t read the following instructions.
Step 1 – Remove the screw from the outlet face
plate. Retain original screw in case you
remove the Embertec Emberplug.
Step 2 – Plug the Embertec Emberplug
into the wall outlet.
Step 3 – The new screw is already inserted in the
Embertec Emberplug, use a screwdriver
to tighten the screw which will secure the
Embertec Emberplug to the wall outlet.
Step by step Instructions on how to install the unit without the screw
Step 1 – Remove the center screw from
the Embertec Emberplug. Retain
the screw in case you need it for
another installation.
Step 2 – Plug the Embertec Emberplug
into the wall outlet.
Quick Installation Guide
To Next Page
Loading...
