Embertec Emberstrip AV+ - Page 8

8
Please read this Instruction Booklet before installing
your Embertec Emberstrip™ AV
+
.
• The Embertec Emberstrip™ AV
+
is an electrical device. Normal safety
precautions for use of an electrical device must be observed.
• Do not immerse the Embertec Emberstrip™ AV
+
in water.
• Needles, knives or any other metal or conductive item must not be
inserted into any Embertec Emberstrip™ AV
+
outlet.
• This device does not convert voltage. It must only be used with
appliances fitted with North American configuration electrical plug
(2-pin, or 3-pin) and rated 110–120V AC.
• Ensure that the SmartSensor is connected to the Embertec Emberstrip™
AV
+
prior to connecting it to the power or the SmartSensor and Power
Saver sockets will not operate.
• Ensure the Embertec Emberstrip™ AV
+
is securely plugged into the wall
socket to avoid it slipping out. Ensure cords plugged into the Embertec
Emberstrip™ AV
+
remain tangle free.
• It is recommended to regularly inspect the Embertec Emberstrip™ AV
+
for
damage. The Embertec Emberstrip™ AV
+
must not be used if it shows any
signs of damage.
• This Embertec Emberstrip™ AV
+
is for indoor household use. Do not use
outdoors. Do not use this Embertec Emberstrip™ AV
+
for anything other
than its intended use. Misuse may cause injury.
• Except as required by law, Embertec is not responsible for special,
incidental, or consequential damages, or loss of data; or any loss or
damage arising from intentional misuse of the product. Such damages
and loss include, but are not limited to: lost business; business downtime;
component/equipment replacement and reconfiguration; and the costs
of retrieval of lost data.
• In normal use, this device intermittently emits a green flashing light.
People who experience photosensitive epilepsy or other forms of
photosensitivity should exercise caution when using the device.
What you need to know!