AIRPLANE
OPERATIONS
MANUAL
GROUND SERVICING
REVISION 41
1-12-60
Page
9
Code
01
Copyright © by Embraer. Refer to cover page for details.
ATA
EICAS
MESSAGE
or
CONDITION
LOCATION
PROCEDURE
34
CAGE Flag
on the ISIS
(THALES)
ISIS
(1) Push the CAGE button to cage
the Integrated Standby
Instrument System (ISIS) and do
not move the ISIS during this
phase.
NOTE: The "ATT 10s" indication
replaces the ATT CAGE flag to
show that the ISIS is in the
attitude reset (caging) phase.
In flight, the pilot must maintain
the airplane in straight and level
flight and at constant speed
before pushing the CAGE button
during this phase.
(2) Make sure that the attitude
function has been set to the true
value in stabilized condition.
31
CAS
Message
displayed
on the PFD
IC-600
On the copilot’s reversionary panel,
set the MFD selector to the EICAS
position. To check which the
discrepant message is, compare the
messages on the copilot’s MFD with
the ones presented on the EICAS.
In a discrepant message on the
EICAS:
− Open the IC-
wait a few seconds, and close it
back. Wait for the IC system
initialization. Do the comparison
again.
To Next Page
