EQUIPMENT
AND FURNISHINGS
AIRPLANE
OPERATIONS
MANUAL
2-02-55
Page
6
Code
01
REVISION 38
AOM-145/1114
FLIGHT DECK CONTROLLER PANEL
The Flight Deck Controller is used to monitor and change various
customer-requested features in the Airshow Digital Interface Unit,
including:
Time to destination;
Greenwich Mean Time;
Destination Airport;
Mode display;
Graphic display (multiple logos);
Languages;
Audio Briefing/announcements.
When the ground speed reaches 100 knots, the FDC automatically
begins to count down the time to destination and displays the time
remaining on the Air Show info page.
After the system is powered, to access the cursor control on the main
menu, press the “SELECT” button on the Cockpit Controller and the
“asterisk” will stop flashing. Use the “SCROLL” knob to scroll up or
down the menu. Press “SELECT” to access your choice.
1 - SEL KEY
When pressed, sets the function pre-selected by the operator
through the UP and DOWN selection keys.
2 - UP AND DOWN SELECTION KEY
Moves up and down the active cursor on the active screen to
enable the subsequent selection.
To Next Page
