AIRPLANE
OPERATIONS
MANUAL
CREW
AWARENESS
JUNE 28, 2002
2-04-05
Page
15
Code
01
NORMAL OPERATION
When the airplane is first energized, the system performs a self-test to
check abnormal conditions in the displays.
On power up, the displays default information are the following:
− PFD: presents EADI, EHSI, airspeed, altitude, radio altitude, vertical
speed scales, flight director mode, autopilot and yaw damper status.
− MFD: presents takeoff page, system menu and navigation data in
Map format. This information is supplied as follows:
− MFD 1: supplied by channel A of both DAUs through IC-600 # 1.
− MFD 2: supplied by channel A of both DAUs through IC-600 # 2.
− EICAS: presents engine and fuel indications, crew awareness
messages (if any), landing gear, flaps, spoilers, pressurization, APU
and trims status. This information is supplied by channel A of both
DAUs through IC-600 # 1.
To Next Page
