AIRPLANE
OPERATIONS
MANUAL
CREW
AWARENESS
REVISION 39
2-04-25
Page
5
Code
01
AOM-145/1114
CONTROLS AND INDICATORS
STALL PROTECTION SYSTEM PANEL
1 - CUTOUT BUTTON (GUARDED)
− Cuts out the associated channel.
− A striped bar illuminates inside the button to indicate that it is in
the cutout position.
2 - TEST BUTTON
− Starts the test sequence, as follows:
− Button illuminates.
− Both stick shakers actuate.
− Pusher actuates.
− Button illumination extinguishes.
NOTE: - NOTE: - Test sequence is completed within a
maximum of 5 seconds.
- The TEST button must be released at the first sign of
stick shaker actuation.
− Button is kept illuminated after an unsuccessful test or if the
system has not been tested.
To Next Page
