AIRPLANE
OPERATIONS
MANUAL
NORMAL PROCEDURES
REVISION 37
1-02-00
Page
3
Code
01
AOM-145/1114
INTRODUCTION
The operating procedures defined in this section have been defined
with the purpose of providing expanded normal procedures that should
be used by trained flight crew to ensure that the airplane is in a proper
condition and correctly configured for each phase of flight.
The source document for all procedures contained herein is the
approved Airplane Flight Manual (AFM). In the event that any
procedure disagrees with the AFM, the AFM will prevail. In the event
that any of the procedures are missing or unusable, operations may be
continued provided the approved AFM is available for use.
The normal procedures established are based on the assumption that
all equipment is operating normally. It is the crew’s responsibility to
verify proper system response. In case improper indications are
observed, verification of the appropriate controls position, checking of
circuit breakers and testing of the related system should be performed
to determine whether the condition affects dispatch or compliance with
the MMEL, and whether any requires maintenance action is required.
Items marked with an asterisk are to be performed at least once a day,
by flight crew or maintenance personnel, at the operator’s discretion.
To Next Page
Loading...
