NORMAL PROCEDURES
AIRPLANE
O
PERATIONS
MANUAL
1-02-09
Page
4
Code
01
REVISION 41
Copyright © by Embraer. Refer to cover page for details.
Flaps Selector Lever.....................................................UP
Make sure that the selected position is consistent with the position
observed during external inspection. If not, be aware that, once the
airplane is energized, if the handle is lifted from the detent, the
flaps will move to the commanded position.
Free Fall Lever Compartment.......................................CHECKED
The OVERRIDE switch must be in the NORMAL position and
guarded.
The FREE FALL lever must be full down.
NOTE: If, during the external inspection, one of the gear uplock hooks
is found mispositioned, the free fall lever may be pulled for
uplock hook repositioning. This procedure must be carried out
with gear pins in place.
To Next Page
Loading...
