AIRPLANE
OPERATIONS
MANUAL
NAVIGATION AND
COMMUNICATION
REVISION 31
2-18-11
Page
31
Code
01
6 - MEMORY INSERT PROMPT
− If it is desirable to insert a new frequency in a particular memory
location, simply press the Line Select Button beside the location
line, moving the yellow cursor box to that line. Then press the
Line Select Button beside the Insert prompt label. This will
cause all the data in memory from the insert location downward
to shift one position down. The cursor will remain in the insertion
selected location allowing the new frequency to be tuned and
stored in that memory location. A MEM FULL (Memory Full)
annunciation will be displayed in the RMU display if the 12
memory locations are filled and the Line Select Button
associated with the Insert prompt is pressed.
− Color: Green.
7 - MEMORY DELETE PROMPT
− To delete a frequency from the memory, press the Line Select
Button adjacent to the line associated with the frequency to be
deleted. Then press the Line Select Button adjacent to the
Delete prompt. The frequency enclosed by the cursor will be
deleted from the memory. Higher numbered memory locations
will then move upward to fill the empty memory location.
− Color: Green.
8 - RADIO PAGE RETURN PROMPT
− Pressing the associated Line Select Button will return the RMU
display to the RADIO Page.
− Color: Green.
9 - MEMORY MORE PROMPT
− The More prompt allows to display memory locations 7 through
12, by pressing the associated Line Select Button. All actions
described for memory locations 1 through 6 are also applicable
to memory locations 7 through 12. If locations 1 through 6 are
not filled, the Second Memory Page will not be accessible.
− Color: Green.
To Next Page
