NAVIGATION AND
COMMUNICATION
AIRPLANE
OPERATIONS
MANUAL
2-18-11
Page
34
Code
01
REVISION 33
HF MEMORY PAGE (only for KHF-1050)
1 - MEMORY PAGE IDENTIFICATION
− Identifies the page as an HF Memory Page.
− Color: White.
2 - MEMORY POSITION
− Identifies the Memory Position.
− Color: Green.
3 - MEMORY FREQUENCY
− Identifies the Memory Frequency.
− Color: Blue.
− Pressing the Upper Line Select Button positions the cursor
around the active frequency.
− If in Split Mode, pressing the Upper Line Select Button positions
the cursor around the Receive Frequency. It also toggles
between the active Receive and Transmission frequency.
− If in Emergency or ITU mode, holding the Upper Line Select
Button displays the corresponding frequency and emission
mode, and releasing it returns the display to the active channel.
4 - MEMORY EMISSION MODE
− Identifies the HF emission mode (UV, LV, UD, LD, AM or CW)
that is in Memory.
− Color: Green.
5 - SPLIT MODE MEMORY
− Example of a Split Mode Memory identifying the Receiving (RX)
and Transmitting (TX) Modes and Frequencies.
6 - RADIO PAGE RETURN PROMPT
− Pressing the associated Line Select Button will return the RMU
display to the RADIO Page.
− Color: Green.
7 - MEMORY MORE PROMPT
− Pressing the associated Line Select Button toggles the memory
window through the 12 memory locations, displaying three
memory locations at a time.
− Color: Green.
To Next Page
