NAVIGATION AND
COMMUNICATION
AIRPLANE
OPERATIONS
MANUAL
2-18-28
Page
4
Code
01
JUNE 29, 2001
VOICE CALLS
− Receiving calls
If a handset is receiving a call, the handset will ring and the
Yellow Ring LED will flash. To establish a connection the user
can either press the Toggle Hook key (key 5 on HANDSET KEY
FUNCTIONS figure) or lift handset from cradle. When a
connection has been established the Yellow Ring Led will be
illuminated.
− Standard telephone calls
Dial a telephone number by entering call prefixes, country and
area codes and number, then press the “#” key or the Toggle
Hook key (key # 5 on HANDSET KEY FUNCTIONS figure) in
the handset keypad. To finish the call press the the Toggle Hook
key (key # 5 on HANDSET KEY FUNCTIONS figure).
− Calls from handset #2 (2-wire auxiliary handset)
Handset #2 can initiate short code, service code , handset to
handset, as well as standard telephone calls. Follow the
procedures described for handset #1 to initiate these types of
calls from handset #2.