EasyManua.ls Logo

Embraer EMB145 - Page 2610

Embraer EMB145
2662 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NAVIGATION AND
COMMUNICATION
AIRPLANE
OPERATIONS
MANUAL
2-18-80
Page
6
Code
01
REVISION 38
AOM-145/1114
NORMAL: The NORM position enables the transponder to
respond to all proper modes (1, 2, 3/A, C, and S),
as well as TCAS TA and TA/RA interrogations, if
selected.
EMERGENCY: The EMER position enables transponder modes 1,
2, 3/A, and S to reply with an emergency code
automatically, irrespective of settings of the
MODE/TCAS rotary knob. Modes 1, 2, and 3/A
automatically respond with a military emergency.
Mode 3/A replies is changed to code 7700.
7 - MODE/TCAS ROTARY KNOB
The MODE/TCAS rotary knob has six positions (OFF, 3A, C, S, TA,
and TA/RA) that enables the different modes of operation and allows
for selection of TCAS functions.
OFF: Disables the Modes 3/A, C and S.
MODE 3/A: When Mode 3/A is enabled, replies to Mode 3/A
interrogations and Mode C framing pulses are
enabled.
Mode 3/A control is provided for pilot or operator
selection of 4096 response codes. Code selection
range is 0000 to 7777, inclusive. When the EMER
mode is enabled, the Mode 3/A military emergency
code 7700 shall be displayed. The Mode 3/A code
remains at 7700 as long as the Master Control knob
is in EMER position.
MODE C: When Mode C is enabled, the system replies to valid
Mode C interrogations. The mode C control disables
or enables the Air Data Source input to the
transponder.
MODE S: This control function enables/disables Mode S
operation. When mode S is enabled, the system
replies to valid ATCRBS/Mode S All-call and mode S
interrogations.