AIRPLANE
OPERATIONS
MANUAL
AUTOPILOT
REVISION 36
2-19-15
Page
5
Code
01
AOM-145/1114
PITCH AND TURN CONTROLLER
1 - PITCH CONTROL WHEEL
Manually controls the pitch when the autopilot is engaged and
the Pitch Hold mode is selected.
Pitch control wheel operation is inhibited if any vertical mode,
except the Pitch Hold mode, is selected in the Flight Director.
2 - TURN CONTROL KNOB
Manually controls the roll attitude when the autopilot is
engaged.
The control has a center detent position at the wings leveled
position. The control remains at the current position when
released.
To Next Page
