AUTOPILOT
AIRPLANE
OPERATIONS
MANUAL
2-19-15
Page
16
Code
01
REVISION 36
AOM-145/1114
14 - GS/LOC/ILS COMPARISON MONITOR DISPLAYS
Label: GS, LOC or ILS.
Color: amber.
Glide Slope comparison monitor (GS label) is displayed while in
GS CAP and below 2500 ft if there is a difference of 0.7 dot
deviation between the PFDs indication. If the radio altitude
output is invalid, the monitor will then be activated by GS CAP
only.
Localizer comparison monitor (LOC label) is displayed while in
approach mode, below 2500 ft if there is a difference of 0.5 dot
deviation between the PFDs indication. If the radio altitude
output is invalid, the monitor will then be activated by GS CAP
only.
ILS comparison monitor display is annunciated when both GS
and LOC comparison monitors are displayed simultaneously.
15 - AOA INDICATION
Color: amber.
Indicates loss of PLI indication due to an invalid Stall Protection
Computer signal.
16 - OVERSPEED/UNDERSPEED WARNING DISPLAY
Color: amber.
Label: MAX SPD for overspeed condition.
MIN SPD for underspeed condition.
Activated by the Flight Director.
Remains displayed as long as the condition exists.
17 - INDICATED AIRSPEED/MACH TARGET DISPLAY
Color: digits are cyan and box is white.
Ranges from 80 KIAS to V
MO
with a resolution of 1 KIAS or from
0.2 Mach to M
MO
with a resolution of 0.01 Mach.
Displayed full time.
Bug moves according to the indicated airspeed/Mach target
value set.
If the indicated airspeed/Mach value is not within the displayed
range of the airspeed scale, the bug will stay at the respective
end of the scale, half-visible and unfilled.
To Next Page
