Need help?Do you have a question about the EMC VNX VG8 and is the answer not in the manual?
Introduces the VNX VG2/VG8 gateway and describes the setup process.
Outlines the three phases of VNX gateway installation and configuration.
Lists and describes the required hardware components for installation.
Details site requirements and checks before proceeding with installation.
Outlines the necessary customer configuration data to collect before setup.
Instructions for installing system components into a customer's cabinet or rack.
Connects blade Fibre Channel ports to Symmetrix/VNX arrays via FC/FCoE switches.
Details connecting the array to Fibre Channel switches for the VNX gateway.
Connects Control Stations and blades via internal private LANs.
Connects clients and the Control Station to the customer's network.
Connects blade Fibre Channel ports directly to the VNX array.
Connects Control Stations and blades via internal private LANs.
Connects clients and the Control Station to the customer's network.
Details the correct sequence for powering on the boot array and related components.
Checks installed software versions and ensures write cache is enabled on the array.
Confirms that read and write cache are enabled on VNX storage processors.
Installs the latest File Operating Environment on the primary Control Station.
Guides on creating file systems, shares, exports, and users for customer data.
Provides steps to upgrade the array's operating environment to resolve errors.
Steps to enable read and write cache on the VNX array to resolve errors.
Instructions to manually set blade Fibre Channel port speed for boot issues.
Manually configures switch zones using World Wide Names for connectivity.
Details creating control LUNs on a VNX array for system data.
Detailed steps for creating control LUNs on CLARiiON storage arrays.
To Next Page
General