Need help?Do you have a question about the EMC2 EMC VNX5400 and is the answer not in the manual?
General| Model | VNX5400 |
|---|---|
| Category | Storage |
| Cache Memory | 8GB |
| Memory | 24 GB |
| Management Software | Unisphere |
| Supported Drives | SAS, NL-SAS, SSD |
| Supported Protocols | iSCSI, NFS, CIFS, FC |
| Connectivity | 10GbE, 1GbE, FC |
| Host Connectivity | iSCSI, FC |
| RAID Levels | 0, 1, 5, 6 |
| Operating System Support | Windows, Linux |
| Redundancy | redundant power supplies, fans |
Specifies the necessary hardware, network, and environmental requirements for system installation.
Procedure for connecting the VNX storage processors to the network for management and initialization.
Details on connecting power cables to PDUs and ensuring proper power distribution.
Instructions for connecting a computer to manage and initialize the VNX storage system.
Steps to download and run the initialization wizard for the VNX storage system.
Guidance on updating VNX software and registering the system with EMC support.
Procedure for installing EMC Secure Remote Support (ESRS) for remote system monitoring.
Instructions on creating storage pools, LUNs, and assigning them to host servers.
To Next Page
