1）Install scanning application, open
scan application setup_v1.1.5.0
(application version number), select
setup to run installation as manager.
2）When the installation is complete, the shortcut icon is displayed either on the desktop or in the
bottom status bar.
3）Open the shortcut application in the bottom status bar, as the below picture ;
Serialport: default com1.
BaudRate: 1D code module select 9600, 2D code module select 115200.
If the desktop has the above shortcut icon, and the bottom status bar does not have this icon,
double-click Restart the application.
5.The way of Bluetooth handle
- 27 -
To Next Page
Loading...