eMeasure eTape16 User Manual

Flexómetros, cintas métricas digitales ETAPE16 EMEASURE Manual Inglés www.viaindustrial.com
Flexómetros, cintas métricas digitales ETAPE16 EMEASURE Manual Inglés www.viaindustrial.com

eMeasure eTape16 Specifications

General

Brand	eMeasure
Model	eTape16
Category	Measuring Instruments
Language	English

Summary

Safety and Compliance Information

General Safety Warnings

Advises wearing safety goggles and avoiding high-speed tape retraction.

FCC Compliance Statement

Details FCC Class B device compliance and operational conditions.

Retains Last Measurement

Hold Measurement

Press the 'hold' button to retain the current measurement on the display.

Clear Memory

Press the 'hold' button again to clear the stored measurement from memory.

Dual Memory Function

Retain Measurement in Memory

Press M1 or M2 for 1 second to retain the current measurement.

Recall Measurement from Memory

Press M1 or M2 again to recall the last stored measurement.

Blade Lock Feature

Engage Blade Lock

Slide the lock mechanism to secure the tape blade in place.

Disengage Blade Lock

Release the lock mechanism to allow the tape blade to retract.

Midpoint Calculation

Calculate Midpoint

Measure two points, then press the button to display the midpoint measurement.

Rezero Function

Reset Zero Point

Press and hold the button for 3 seconds to reset the device's zero point.

Inside/Outside Measurement Selection

Measure Inside Dimension

Select the mode for accurate inside dimension measurements.

Measure Outside Dimension

Select the mode for accurate outside dimension measurements.

Unit Conversion

Convert Between Units

Switch between inch (in) and centimeter (cm) measurement units.

Battery Replacement

Replace Battery

Instructions for replacing the CR2032 battery in the device.