Need help?Do you have a question about the Emerald Spa Great Lakes Spa 2008 and is the answer not in the manual?
General| Brand | Emerald Spa |
|---|---|
| Model | Great Lakes Spa 2008 |
| Category | Hot Tub |
| Language | English |
Warnings about child supervision, grounding, infectious diseases, and careful entry/exit.
Dangers of accidental drowning, suction fittings, and electrical shock hazards.
Guidelines on water temperature, pregnancy, alcohol, drugs, and medical conditions.
Specific safety instructions for cord-connected units.
Instructions for proper grounding and bonding of electrical components and metal surfaces.
Requirements for installing a clearly labeled emergency switch for specific dwelling types.
Safety precautions for audio components, including shock risks, maintenance, and connections.
Advice on flooring, space for cover, level surface, and structural support for indoor spas.
Recommendations for solid surface, natural elements, and secure fencing for outdoor spas.
Drainage, access to equipment, placement of electrical components, and water supply.
Steps for unwrapping, cleaning, and preparing the spa for setup.
Guidelines for electricians on bonding, wiring, GFCI, and conductor sizing.
Instructions for filling the spa, checking valves, water level, and leak checks.
How to use air controls to adjust jet agitation and airflow.
Explanation of how diverter valves redirect water flow between spa zones.
How to adjust water flow using flow control valves for different jet intensities.
Description of the ozone jet and its function in water purification.
Details on the forceful water/air stream from 1-1/2" mini jets.
Instructions on customizing jet faces for different massage experiences and adjusting flow.
Safety and procedural information for replacing the spa light bulb.
Instructions on how to drain the spa water using the Quick Drain system.
Recommended cleaning agents and methods for the spa's acrylic or ABS surface.
Guidance on removing and cleaning adjustable jet faces for optimal performance.
Advice on proper handling, cleaning, and securing the spa cover to prevent damage.
Steps to prepare the spa for winter to prevent freezing damage.
Details on how the optional ozonator purifies spa water using ozone.
Guidelines for maintaining water quality, chemical balance, and filter cleaning.
Steps to diagnose and resolve issues with the equipment module not operating.
Troubleshooting steps for pump running but no water flow.
Diagnosing problems with water flow and the heater not engaging.
Solutions for low or pulsating water flow in high-speed mode.
Troubleshooting why ozone bubbles are not appearing from the ozone jet.
Steps to address excessive pump vibration and air in the pump housing.
Diagram and notes for connecting the GFCI load center to the hot tub system.
Importance of connecting the white neutral wire for GFCI functionality.
Emphasis on qualified electrician for GFCI installation and code compliance.
Details on the duration of structural, surface, and component warranties.
Conditions that void the warranty, including misuse, improper maintenance, and alterations.
Procedure for obtaining warranty service and responsibilities of the owner.
Specific actions or conditions that will void the spa's warranty.
Limitations on implied warranties, consequential damages, and consumer legal rights.
To Next Page