36 100-214-294 REV. 05
6.3.3 Cleaning Items (Treating Samples)
NOTICE
To stop ultrasonics at any time, turn the Timer Knob to the zero
position.
Table 6.8 Treating Samples
Step Action
1 Turn Main Power switch on.
2
Turn the Timer Knob clockwise to set the amount of time (0–60 minutes)
you wish the items to be cleaned. Turn the Timer Knob counterclockwise
to the HOLD position for continuous operation.
3
Place the items into a basket, perforated tray, or beakers in a positioning
cover.
4
If using beakers or a solid tray, add cleaning solution to beakers or tray
to cover the items.
5
Slowly lower the tray or beakers into the tank. Do not allow items to
contact the tank bottom.
6 When items are clean, slowly remove them from the tank.
7 Rinse the clean items with clean water and dry them, if necessary.
To Next Page
Loading...