Emerson DL8000 - Page 4

Safe Use Instructions – Emerson DL8000 Preset Controller
Part D301347X412
February 2018
2 www.Emerson.com/RemoteAutomation
Specifications (NMi Version)
APPROVALS
Evaluated to the following European Standards (EMC):
EN 55011 (Emissions).
EN 61000-4-2 (Electrostatic Discharge Immunity).
EN 61000-4-3 (Electromagnetic Field Immunity).
EN 61000-4-4 (Electrical Fast Transients Immunity).
EN 61000-4-5 (Surge Immunity).
EN 61000-4-6 (Conducted Immunity).
EN 61000-4-11 (AC Voltage Dips + Interruptions).
ATEX:
EN 60079-0: 2012
EN 60079-1: 2014
IECEx:
IEC 60079-0: 2011 Ed. 6
IEC 60079-1: 2014-06 Ed. 7.0
MID:
OIML R117-1;WELMEC 8.8; WELMEC 7.2, Issue 3
Certified by Sira as Model W40176.
Certified by NMI as DL8000.
Product Markings for Hazardous Locations:
Ex db IIB T6 Gb (Tamb = -40
o
C to +65
o
C) IP66
II 2 G 0081
ATEX Cert. Sira 08ATEX1063X
IEC Cert. IECEx SIR 08.0019X
NMI Evaluation Cert. TC7661
Figure 2. DL8000 Label (without NMi Approval)
Declaration of Conformity (Non-NMi Version)
Hereby, Remote Automation Solutions declares that the
DL8000 products are in compliance with the essential
requirements and other relevant provisions of European
Directives 2014/30/EU (EMC) and 2014/34/EU (ATEX).
Specifications (Non-NMi Version)
POWER
100 to 240 V ac (+10%/–15%), 50 to 60 Hz,
1-phase 30-watt nominal.
MATERIALS
Enclosure: IP66, weatherproof, corrosion-resistant
cast aluminum with stainless steel bolts.
Wire Channel Covers: Polypropylene Plastic.
Modules: Thermoplastic Polyester, solvent-
resistant.
ENVIRONMENTAL
Temperature (operating):
–40C to +65C.
–20C to +65C (LCD display).
Temperature (storage, non-operating):
–30C to +80C.
Relative Humidity: 5-95% non-condensing per IEC
60068-2-3.
WEIGHT
34 kg for housing, backplane, and CPU.
APPROVALS
Evaluated to the following European Standards (EMC):
EN 55011 (Emissions)
EN 61000-4-2 (Electrostatic Discharge Immunity)
EN 61000-4-3 (Electromagnetic Field Immunity)
EN 61000-4-4 (Electrical Fast Transients Immunity)
EN 61000-4-5 (Surge Immunity)
EN 61000-4-6 (Conducted Immunity)
EN 61000-4-11 (AC Voltage Dips+ Interruptions)
ATEX:
EN 60079-0:2012
EN 60079-1:2014
IECEx:
IEC 60079-0:2011 Ed. 6
IEC 60079-1:2014-06 Ed. .07
Certified by Sira as Model W40176.
Product Markings for Hazardous Locations:
Ex db IIB T6 Gb (Tamb = -40
o
C to +65
o
C) IP66
II 2 G 0081
ATEX Cert. Sira 08ATEX1063X
IEC Cert. IECEx SIR 08.0019X