EasyManua.ls Logo

Emerson EPB-3004 - Power Source; Charging Instructions

Emerson EPB-3004
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
POWER SOURCE
This unit can be operated using either AC power or the built-in Li-Polymer rechargeable battery
AC POWER OPERATION
An AC power cord (included) is required for operating the main unit when using AC power
mode. To connect the AC power cord to the unit and 120V~ 60Hz AC outlet:
1.
Firmly and securely insert the AC plug of the power cord into the AC Jack on the back of the
unit.
2.
Plug the other end of AC power cord into the 120V AC outlet. CHARGE LED will be lighting
Red during battery charging. Connecting this system to any other power source may cause
damage to the system.
3.
Slide the FUNCTION switch on the top panel to RADIO,CD/USB/ or AUX mode to turn on the
unit, the POWER INDICATOR will light.
Note: When the unit is not operated for long periods of time, unplug the AC power cord from the
unit and wall outlet.
BUILT-IN RECHARGEABLE BATTERY OPERATION
1. This unit will also operate using the built-in Lithium rechargeable battery. Fully charge the
built-in rechargeable battery before first use, the CHARGE INDICATOR will turn from Red to
Green when the built-in battery is fully charged.
2. Unplug the AC jack of main unit. The unit will enter Battery Operating mode automatically.
LOW BATTERY INDICATION
1. When the built-in battery power remains around 5%, the CHARGE INDICATOR will light
Red and flash, please connect the unit to AC outlet for charging.
2. After prolonged use, the battery voltage may discharge and operation might become
intermittent. When this happens, please recharge the internal battery.
CHARGING THE BATTERY WITH THE INCLUDED AC POWER CORD
1. Charge the built-in Lithium battery a minimum of 5 hours prior
to first use. Firmly and securely
insert the AC power cord into the AC Jack on the back of the unit.
2. Plug the other end of AC power cord into the 120V AC outlet. Connecting this system to any
other power source may cause damage to the system.
3. When the AC power is connected, the battery charging indicator will light solid Red showing
that the internal battery is being charged.
4. After the battery is fully charged, the charging indicator will turn to solid Green.
CHARGING INSTRUCTIONS

Related product manuals