To Next PageTo Next Page
Need help?Do you have a question about the Emerson EV1000-4T0055G/P and is the answer not in the manual?
General| Model | EV1000-4T0055G/P |
|---|---|
| Type | Inverter |
| Input Frequency | 50/60Hz |
| Output Frequency | 0 - 400 Hz |
| Protection Level | IP20 |
| Operating Temperature | -10°C to +50°C |
| Communication Interface | RS485 |
| Humidity | 5% - 95% RH, non-condensing |
| Altitude | 1000m |
| Storage Temperature | -20°C to +70°C |
Defines symbols and terminology for hazards causing injury or equipment damage.
Critical safety instructions and precautions for installing the drive correctly.
Important considerations and potential issues to be aware of when operating the drive.
Lists technical specifications and operating parameters of the EV1000 series drives.
Guidelines for physically mounting the drive, including environmental and clearance requirements.
General wiring precautions, including power and control circuit wiring.
Explains how to wire control terminals and set jumpers for various functions.
Explains earthing methods and recommendations for safe and effective grounding.
Guidance on operating the drive using the LED keypad.
Details the procedure for setting parameters using the LED keypad, including menu structure and examples.
Covers fundamental parameters for frequency setting, control modes, running direction, and output limits.
Details parameters for reference frequency selection, gain, filtering, and curve settings.
Covers parameters for starting modes, acceleration/deceleration, and braking functions.
Discusses parameters for auto energy saving, AVR, slip compensation, and carrier wave frequency.
Explains parameters for the Simple PLC function, enabling programmed operational sequences.
Details parameters for setting up closed-loop control systems using analog or pulse feedback.
Covers parameters for the traverse function, used in applications requiring lateral movement or rolling.
Explains the assignment of functions to multi-function input and output terminals.
Details advanced functions like auxiliary frequency settings and keypad lock configurations.
Covers communication configuration, baud rate, data format, and local address settings.
Details parameters for motor characteristics, including poles, power, current, resistance, and inductance.
Covers various protection functions like motor overload, stall overvoltage, and current limiting.
Lists fault codes, descriptions, possible reasons, and corrective actions for drive issues.
Details parameters for the Simple PLC function, enabling programmed operational sequences.
Details parameters for setting up closed-loop control systems using analog or pulse feedback.
Explains the assignment of functions to multi-function input and output terminals.
Lists and explains various protection parameters for the drive and motor.
Details Modbus function codes for reading/writing parameters and status.
