Emerson EWL20S5 - S-Clr-B; Clr-R

5-2 L2601EA
2. Flicker Adjustment
1. Enter the Service mode. (See page 5-1.)
2. Press [2] button on the remote control unit.
The following screen appears.
3. If Flicker Adjustment is not fit, the screen become
the following.
4. Press [CH o / p] buttons on the remote control
unit so that flash stops.
D2-BRT
[MENU] → [5]
133
D2-CNT 140
D2-CLR-R 74
D2-CLR-B 74
D2-TNT 128
D2-SHR 112
D3-BRT
[MENU] → [6]
126
D3-CNT 138
D3-CLR-R 64
D3-CLR-B 64
D3-TNT 128
D3-SHR 112
DR(C/D1)
[VOL p] → [4]
176
C-DR(C/D2) 157
DB(C/D1)
[VOL p] → [6]
175
C-DB(C/D2) 152
Item
Button
(on the service
remote control)
Data
Value
VCOM
110
VCOM
110
FLASH (Go and Off)