62
Editing DVD-RW discs in Video mode (cont’d)
Editing
Note
•You cannot select a time for
putting markers beyond a
length of a title.
•A chapter marker may be
delayed according to the
recording content.
Setting or clearing chapter markers
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can set chapter markers at a
specified time you selected for
titles with more than 5 minutes.
1
Press SETUP button. Select
“DISC” using
{ / B buttons,
then press ENTER button.
SETUP/DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Titlelist will appear.
Screen:
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
4
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
5
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
6
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
A chapter marker will be added.
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
To Next Page
Loading...
