1-9-2 E9601FW
5. After updating is finished, the tray opens
automatically.
Fig. f appears on the screen and Fig. g appears on
the VFD.
At this time, no buttons are available.
6. Press [POWER] button to turn the power off. Then
press it again.
Fig. f Completed Program Mode Screen
* Firmware Version differ depending on the
models, and indication is one example.
Firm Update Mode ver. R2F3000S1E
R2F3001S1E
B/E Firmware
Update End
Fig. g VFD in Completed Program Mode
To Next Page
Loading...
