Instruction Manual
D100398X012
ET Valve
November 2017
22
Packing Kits
Standard Packing Repair Kits (Non Live‐Loaded)
REPAIR KIT MATERIAL
STEM DIAMETER, mm (INCH)
YOKE BOSS DIAMETER, mm (INCH)
9.5 (3/8)
54 (2‐1/8)
12.7 (1/2)
71 (2‐13/16)
19.1 (3/4)
90 (3‐9/16)
25.4 (1)
127 (5)
31.8 (1-1/4)
127 (5, 5H)
Part Number
PTFE (Contains keys 6, 8, 10, 11, and 12) RPACKX00012 RPACKX00022 RPACKX00032 RPACKX00342 RPACKX00352
Double PTFE (Contains keys 6, 8, 11, and 12) RPACKX00042 RPACKX00052 RPACKX00062 RPACKX00362 RPACKX00372
PTFE/Composition (Contains keys 7, 8, 11, and 12) RPACKX00072 RPACKX00082 RPACKX00092 - - - - - -
Single Graphite Ribbon/Filament
(Contains keys 7 [ribbon ring], 7 [filament ring], 8, and 11)
RPACKX00102 RPACKX00112 RPACKX00122 - - - - - -
Single Graphite Ribbon/Filament
(Contains keys 7 [ribbon ring], 7 [filament ring], and 11)
- - - - - - - - - RPACKX00532 RPACKX00542
Single Graphite Ribbon/Filament
(Contains keys 7 [ribbon ring], 7 [filament ring])
RPACKX00132 RPACKX00142 RPACKX00152 - - - - - -
Double Graphite Ribbon/Filament
(Contains keys 7 [ribbon ring], 7 [filament ring], 8, and 11)
RPACKX00162 RPACKX00172 RPACKX00182 - - - - - -
ENVIRO‐SEAL Packing Retrofit Kits
Retrofit kits include parts to convert valves with existing standard bonnets to the ENVIRO‐SEAL packing box
construction. Refer to figure 11 for key numbers for PTFE packing, to figure 12 for key numbers for Graphite ULF
packing, and to figure 13 for key numbers for duplex packing. PTFE kits include keys 200, 201, 211, 212, 214, 215,
216, 217, 218, tag, and cable tie. Graphite ULF kits include keys 200, 201, 207, 208, 209, 210, 211, 212, 214, 217, tag,
and cable tie. Duplex kits include keys 200, 201, 207, 209, 211, 212, 214, 215, 216, 217, tag, and cable tie.
Stems and packing box constructions that do not meet Emerson stem finish specifications, dimensional tolerances,
and design specifications, may adversely alter the performance of this packing kit.
For part numbers of individual components in the ENVIRO‐SEAL packing kits, refer to instruction manual ENVIRO‐SEAL
Packing System for Sliding‐Stem Valves, D101642X012
.
ENVIRO‐SEAL Packing Retrofit Kits
PACKING
MATERIAL
STEM DIAMETER, mm (INCH)
YOKE BOSS DIAMETER, mm (INCH)
9.5 (3/8)
54 (2‐1/8)
12.7 (1/2)
71 (2‐13/16)
19.1 (3/4)
90 (3‐9/16)
25.4 (1)
127 (5)
31.8 (1‐1/4)
127 (5, 5H)
Part Number
Double PTFE RPACKXRT012 RPACKXRT022 RPACKXRT032 RPACKXRT042 RPACKXRT052
Graphite ULF RPACKXRT262 RPACKXRT272 RPACKXRT282 RPACKXRT292 RPACKXRT302
Duplex RPACKXRT212 RPACKXRT222 RPACKXRT232 RPACKXRT242 RPACKXRT252
To Next Page
Loading...
