Emerson Fisher ET - Page 28

Instruction Manual
D100398X012
ET Valve
November 2017
28
Figure 15. Alternate Configurations
FLOW UP
NPS 1 TO 8 ET USING PEEK ANTI‐EXTRUSION RINGS
FLOW DOWN
21B2120‐A
A6137
2
27
29
28
2
27
29
28
Key Description
Valve Body
(figures 16 through 21)
1 Valve Body
If you need a valve body as a replacement part, order by valve
size, serial number, and desired material.
2* Valve plug
3* Cage
4 Trim adaptor
5 Trim adaptor
7* Valve plug stem
8* Pin
9* Liner
9* Seat Ring
10* Bonnet Gasket
11* Cage Gasket
12* Spiral‐Wound Gasket
13* Seat Ring or Liner Gasket
14* Adaptor Gasket
15 Cap Screw
15 Stud
16 Nut
Key Description
17 Pipe Plug, for use in valves with drain tapping only
18 Flow Direction Arrow
19 Drive Screw
20* Adaptor Gasket
21* Seat Disk Retainer
22* Disk Seat
23* Disk
24* Seal Ring (EAT)
25* Backup Ring (EAT)
26 Load Ring (for NPS 8 ET only)
27* Retaining Ring
27* Shim (EAT)
28* Seal Ring (ET)
29* Backup Ring (ET)
31* Whisper Trim III Cage Retainer for
Levels A3, B3 & C3 (NPS 6 ET only)
31* Whisper Trim III Cage Retainer & Baffle
32 Cavitrol III Bonnet Spacer
32 Whisper Trim III Bonnet Spacer (NPS 6 ET only)
51* Shim
54 Wire
63* Anti‐Extrusion Ring
*Recommended spare parts