Need help?Do you have a question about the Emerson IC200PNS001 and is the answer not in the manual?
Provides a high-level understanding of the PNS module's function and role in PROFINET networks.
Details the two available hardware versions of the PNS module, specifying media types.
Lists the technical capabilities and physical attributes of the PNS module.
Explains the function and status indication of each LED on the PNS module.
Describes the types and installation of power supply modules compatible with the PNS.
Details the specifications and connection types of the Ethernet ports on the PNS.
Provides information on the USB port's purpose, primarily for firmware updates.
Lists modules, carriers, and power supplies that can be used with the PNS.
Covers the physical mounting of the PNS module onto a DIN rail or panel.
Specifies necessary space for cables and connectors for proper installation and reliability.
Outlines essential installation practices, including safety and environmental considerations.
Provides specific guidelines for installing the module in hazardous locations per UL and ATEX standards.
Explains the meaning of ATEX markings related to explosive atmospheres.
Details the process of mounting the module onto a standard DIN rail.
Describes how to safely detach the module from the DIN rail.
Guides through the process of connecting and securing power supply modules to the PNS.
Explains the sequence of events during module power-up and how to restart it.
Describes the meaning of the status and activity LEDs on the PNS module.
Details specific LED blink sequences that indicate special conditions or errors.
Covers the procedures for updating the firmware of the PNS module.
Explains how to update firmware for modules connected to the PNS.
Guides on installing the necessary driver for USB firmware updates.
Introduces the overall process of configuring the PNS and its associated I/O devices.
Outlines the fundamental steps required to configure the PROFINET system.
Specifies the requirements for the PROFINET IO configuration tool.
Details the process of integrating the PNS into a PROFINET network.
Explains how to set up the core parameters for the PNS module.
Covers the configuration settings for Media Redundancy Protocol (MRP).
Describes configuration for HSB CPU redundancy with PROFINET I/O.
Explains how to configure power supplies for the PNS in the setup tool.
Details how to add various VersaMax modules to the remote node configuration.
Discusses the installation of additional power supplies between modules.
Covers the configuration of parameters for individual VersaMax modules.
Guides on configuring analog modules that require specific jumper settings.
Explains the process of assigning unique names to IO-Devices using DCP.
Describes the behavior and data transfer after configuration is saved to the IO-Controller.
Details how module outputs behave during configuration and operation phases.
Outlines the reaction of the PNS to clearing the IO-Controller's configuration.
Provides step-by-step instructions for replacing the PNS module.
Explains how to monitor scanner status and use control bits for diagnostics.
Details the specific output bits used to trigger diagnostic actions and clear faults.
Describes the input status bits that provide information about the scanner's health and connectivity.
Covers the methods for handling fatal errors and PROFINET diagnostic alarms.
Explains how the system manages fatal errors, including blinking codes and automatic restarts.
Describes how the PNS reports non-fatal errors and diagnostic information to the controller.
Provides procedures for clearing faults specifically on VersaMax analog modules.
Details how the PNS detects and reports issues with module presence or configuration.
Specific diagnostic information related to the BEM003 PROFIBUS DP Master module.
Step-by-step guide to activate and use Maintenance Mode for servicing.
Instructions on how to safely return the PNS from Maintenance Mode to Normal Mode.
Explains how the module's mode is preserved across power interruptions.
Lists the various PROFINET protocols and features supported by the PNS.
Provides essential technical specifications and performance data for the PNS.
Highlights features that are not supported in the current release of the PNS.
Provides a high-level understanding of the PNS module's function and role in PROFINET networks.
Details the two available hardware versions of the PNS module, specifying media types.
Lists the technical capabilities and physical attributes of the PNS module.
Explains the function and status indication of each LED on the PNS module.
Describes the types and installation of power supply modules compatible with the PNS.
Details the specifications and connection types of the Ethernet ports on the PNS.
Provides information on the USB port's purpose, primarily for firmware updates.
Lists modules, carriers, and power supplies that can be used with the PNS.
Covers the physical mounting of the PNS module onto a DIN rail or panel.
Specifies necessary space for cables and connectors for proper installation and reliability.
Outlines essential installation practices, including safety and environmental considerations.
Provides specific guidelines for installing the module in hazardous locations per UL and ATEX standards.
Explains the meaning of ATEX markings related to explosive atmospheres.
Details the process of mounting the module onto a standard DIN rail.
Describes how to safely detach the module from the DIN rail.
Guides through the process of connecting and securing power supply modules to the PNS.
Explains the sequence of events during module power-up and how to restart it.
Describes the meaning of the status and activity LEDs on the PNS module.
Details specific LED blink sequences that indicate special conditions or errors.
Covers the procedures for updating the firmware of the PNS module.
Explains how to update firmware for modules connected to the PNS.
Guides on installing the necessary driver for USB firmware updates.
Introduces the overall process of configuring the PNS and its associated I/O devices.
Outlines the fundamental steps required to configure the PROFINET system.
Specifies the requirements for the PROFINET IO configuration tool.
Details the process of integrating the PNS into a PROFINET network.
Explains how to set up the core parameters for the PNS module.
Covers the configuration settings for Media Redundancy Protocol (MRP).
Describes configuration for HSB CPU redundancy with PROFINET I/O.
Explains how to configure power supplies for the PNS in the setup tool.
Details how to add various VersaMax modules to the remote node configuration.
Discusses the installation of additional power supplies between modules.
Covers the configuration of parameters for individual VersaMax modules.
Guides on configuring analog modules that require specific jumper settings.
Explains the process of assigning unique names to IO-Devices using DCP.
Describes the behavior and data transfer after configuration is saved to the IO-Controller.
Details how module outputs behave during configuration and operation phases.
Outlines the reaction of the PNS to clearing the IO-Controller's configuration.
Provides step-by-step instructions for replacing the PNS module.
Explains how to monitor scanner status and use control bits for diagnostics.
Details the specific output bits used to trigger diagnostic actions and clear faults.
Describes the input status bits that provide information about the scanner's health and connectivity.
Covers the methods for handling fatal errors and PROFINET diagnostic alarms.
Explains how the system manages fatal errors, including blinking codes and automatic restarts.
Describes how the PNS reports non-fatal errors and diagnostic information to the controller.
Provides procedures for clearing faults specifically on VersaMax analog modules.
Details how the PNS detects and reports issues with module presence or configuration.
Specific diagnostic information related to the BEM003 PROFIBUS DP Master module.
Step-by-step guide to activate and use Maintenance Mode for servicing.
Instructions on how to safely return the PNS from Maintenance Mode to Normal Mode.
Explains how the module's mode is preserved across power interruptions.
Lists the various PROFINET protocols and features supported by the PNS.
Provides essential technical specifications and performance data for the PNS.
Highlights features that are not supported in the current release of the PNS.
To Next Page
General