7
EN
INTRODUCTION
CONNECTION
INITIAL SETTING
OPTIONAL SETTING TROUBLESHOOTING
WATCHING TV INFORMATION
1. POWER button (p11)
Press to turn the unit on and off.
2. INPUT SELECT button (p13)
Press to access connected an external device like a
DVD player or VCR.
Press to decide the command of setting when the
menu is displayed.
3. CHANNEL
K
/
L
buttons (p13)
Press to select channels or move up/down through the
main menu items.
4. VOLUME
X
/
Y
buttons (p13)
Press to adjust the volume or move right (
X
)
/
left (
Y
)
through the main menu items.
5. SETUP button (p11)
Press to display the main menu.
6. Infrared Sensor Window
Receives infrared rays transmitted from the remote
control.
•
•
Control Panel5
Rear Panel5
1. ANT jack (p8)
RF coaxial cable connection for your antenna or
cable /satellite box.
2. HEADPHONE jack
Headphone connection for personal listening.
3. COMPONENT and AUDIO input jacks (p9)
Component video cable connection for an external
device.
Use component video and audio output jacks of an
external device.
4. AUDIO input jacks (p9)
RCA audio cable connection for an external device.
5. VIDEO input jack (p10)
RCA video cable connection for an external device.
6. S-VIDEO input jack (p9)
S-video cable connection for an external device.
7. COAXIAL (digital audio) output jack (p10)
Digital audio coaxial cable connection for a decoder or
an audio receiver.
Use digital audio input jack of an external device.
8. AC power cord
Connect to a standard AC outlet to supply power to
this unit.
INPUT SELECT
SETUP
POWER
VOLUME
CHANNEL
6
5
2
3
4
1
VIDEO 2
AUDIOCOMPONENT
LR
AUDIO
LR
VIDEOS-VIDEO
COAXIAL
PrPbY
VIDEO 1
6
5
4
3
7
8
side of the unit
rear of this unit
2
1
To Next Page
Loading...
