Emerson MBR-1 - Basic Radio Operations; Powering On and Selecting Mode; Band Selection and Tuning; Volume and Tone Adjustment

AM
CB
TV2 VHF
TV1
WB
SW1/SW2 FM/AIR
BAND
VOLUME
MIN MAX
TONE
MIN MAX
RADIO
P. A .
Tuning
ON
OFF
POWER
BASIC RADIO OPERATIONS
Switch the POWER to "ON".
Note:
Make sure that the power supply selector
switch on the back cabinet is set
correctly for either AC or DC coperation.
1.
Switch to RADIO.
3. Select a BAND. 4. Tune to the desired station.
5. Adjust the Volume and Tone
1.
2.
3.
When FM reception is weak, set the AFC switch to "ON" to obtain a clearer sound.
For AM reception, the direction finder can be rotated to improve reception when necessary.
Be sure to fully extend the telescopic antenna and rotate to a direction that gives the clearest
sound. When receiving strong or nearby stations it may be desirable to shorten the antenna to
prevent distorted sound.
2.
NOTE:
7