12
5.) Depress the Time button and the Up or Down buttons to set the display to the
correct time. Be sure to confirm that you have set the time correctly to ‘AM’ or
‘PM’ by observing the AM indicator.
6.) After you set the time, reconfirm that the Day, and Month/Date displays are still
correct. Make final adjustments if necessary.
The SmartSet
®
clock memory is now reset and the new lithium battery will maintain
it for the next 5 to 8 years, depending on the number and duration of the power
outages you experience.
IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm
mode settings as well.
AC100_072806.p65 28/7/2006, 10:3212
To Next Page
Loading...
