Emerson Rosemount 975 - Chapter 4 Filter Replacement

4 Filter Replacement
1. Remove the six rear screws (Item A - M4 x 10 A4) and open the Air Shield
Filter ReplacementFigure 4-1:
A. Six rear screws
B.
Larger gasket
C. Filter
D. Smaller gasket
2. Remove the larger gasket (Item B) and then remove the filter (Item C).
3.
Remove the smaller gasket (Item D) and replace it with a new one.
4. Mount the new filter into the Air Shield.
5. Fit the new larger gasket (Item B).
6. Close the Air Shield and lock the screws (Item A).
Filter Replacement
7
Legacy