To Next PageTo Next Page
Need help?Do you have a question about the Emerson SW102 and is the answer not in the manual?
General| Voltage | 24 VDC |
|---|---|
| Touchscreen | Yes |
| Operating Temperature | 0° to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity Range | non-condensing |
| Power Supply | 24 VDC |
| Communication Ports | Ethernet, RS-232, RS-485 |
| Protocols Supported | Modbus |
| Enclosure Rating | IP65 |
| Display Type | TFT LCD |
Information on FCC rules for Class B digital devices and interference mitigation.
Specifies what defects and period are covered by the warranty.
Explains Emerson's process for replacing defective controls.
Guides users on how to get service with proof of purchase.
Lists conditions and actions that void the warranty.
Details how state laws may affect warranty rights.
Step-by-step instructions for wiring and mounting the receiver.
Instructions for synchronizing wall control and receiver codes.
Procedure for installing the 12V battery in the wall control.
How to adjust fan speed and light brightness using the wall control.
Common checks for when the fan or light fails to operate.
Essential safety precautions for using and installing the device.
Lists the items included in the product packaging.
