R
Robert GreenSep 2, 2025
Why Emerson DVD Recorder discs recorded on this unit cannot be played back on other DVD players?
- JJulia MontgomerySep 2, 2025
If you are using DVD-RW/-R, please ensure you finalized the disc after recording.
Why Emerson DVD Recorder discs recorded on this unit cannot be played back on other DVD players?
If you are using DVD-RW/-R, please ensure you finalized the disc after recording.
Why Emerson DVD Recorder disc does not play back?
If the disc is upside down, insert it with the labeled side facing up. If moisture has condensed inside the unit, remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates.
Why is Emerson DVD Recorder sound noisy?
Clean the disc with a cleaning cloth.
Why does picture noise appear on Emerson DVD Recorder?
Clean the disc with a cleaning cloth.
Why setup menu cannot be called up on Emerson DVD Recorder?
Setup menus cannot be called up during DVD recording or DVD playback.
Why there is no image from HDMI connection on Emerson DVD Recorder?
Check the HDMI connection and the status of HDMI related indications. Verify that the connected monitor device or other device supports HDCP, as this unit will not output a video signal without HDCP support. Also, check the HDMI settings and ensure the output format of this unit (HDMI FORMAT) matches the supported input format of the other connected device. If the unit is connected to an unauthorized display device with an HDMI cable, the audio/video signal may not be output when playing back a commercial DVD-video.
Why Emerson DVD Recorder timer recording is impossible?
Make sure that the corresponding indicator appears on the front panel display of this unit. If it does not, press [TIMER SET].
Why Emerson DVD Recorder cannot record a TV program?
This unit does not have a tuner to receive TV broadcasting. You must connect this unit to an external tuner to record TV programs.
What to do if there is no sound or the sound is distorted on Emerson DVD Recorder?
Ensure all connections are securely re-connected and that the connecting cord is not damaged. Check the connections to the amplifier input and verify that the input device setting on the amplifier is correct. Note that when the unit is in pause mode or slow-motion playback, sound is not output, and this is not a malfunction. Similarly, sound is not output in fast forward or fast reverse mode, which is also normal. Also, while the setup menu or timer programming display is shown or while the screen saver is active, the audio is muted.
What to do if Emerson DVD Recorder unit does not operate properly?
If static electricity or other factors cause the unit to operate abnormally, unplug the unit and then plug it in again.
Media Type | DVD |
---|---|
Recordable Media | DVD-R, DVD-RW, DVD+R, DVD+RW |
Video Recording Format | MPEG2 |
Audio Recording Format | Dolby Digital |
Tuner | NTSC |
Remote Control | Yes |
Disc Compatibility | CD, CD-R, CD-RW |
Output Resolution | 480p |
Inputs | Composite Video, S-Video |
Outputs | Composite Video, S-Video |